Suzhou Myesde Ultra Clean Technology Co., Ltd.
Suzhou Myesde Ultra Clean Technology Co., Ltd.17+years engaged in sterile cleanroom anti-static research and development,production. More than 30000square meters workshop. More than 300*employees
Add to Cart
Sealed Edge Laundered Polyester 70% IPA - Sterile Knit Wet Cleanroom Wiper
Product Detail:
Presaturated wipes ensure consistent saturation of each wipe independent of operator. Presaturated wipes can increase solvent control and accountability as well as reduce VOC emissions. The wipes are provided in convenient and easy to use peel and reseal pouches.
Benefits:
1.Packaged in easy-to-use, recloseable slider bags reducing solution evaporation that preserves the consistent wiper wetness level
2.Low levels of ions, NVRs (non-volatile residues), particles, and fibers for use in critical cleaning applications
3.Meets USP <797> and USP <800> wiper requirements
Technical Data:
| Attribute; (units) | Value ** | Test Method | ||
| Basis weight; nominal (g/m2) | 120 | MSD-QI-QS-007 A0 | ||
| Absorbency in water | IEST-RP-CC004.3 | |||
| Intrinsic; (mL/g) | 2.41 | |||
| Extrinsic; (mL/m2) | 290 | |||
| Sorptive rate; (seconds) | 1 | IEST-RP-CC004.3 | ||
| Non-volatile residue, NVR | IEST-RP-CC004.3 | |||
| In deionized water; (g/m2) | 0.014 | |||
| In isopropanol; (g/m2) | 0.012 | |||
| Specific ions | IEST-RP-CC004.3 | |||
| Sodium; (ppm) | 0.025 | |||
| Chloride; (ppm) | 0.076 | |||
| Potassium; (ppm) | 0.094 | |||
| Particles, readily releasable | ||||
| APC: ≥0.3μm(Ea/ft3) | 92 | IEST-RP-CC003.3 | ||
| LPC:≥0.5μm(106/m2 ) | 16 | IEST-RP-CC004.3 | ||
Material:
• 100% Polyester
• Microfiber(70%Polyester and 30% Nylon)
• 100% Melt-blown fabric(PP)
• 55%Woodpulp and 45% Polyester
Technical Data:
The data is based on the polyester material.
Shelf Life:
• Non-Sterile (Dry) –3 years from date of manufacture
• Non-Sterile (Pre-Wetted) – 2 years from the date of manufacture
• Sterile – 2 years from the date of manufactue
Features:
1.Pre wetted wiper can control the amount of solvent released on the surface of the object,in line with the requirements of wiping;
2.It can reduce the amount of solvent and its evaporation,so that the solvent is controllable;
3.Healthier and safer working environment,reduce the release of volatile organic compounds, greatly reduce environmental pollution;
4.It can reduce the fire and its potential harm caused by solvent leakage
5.Reduce the generation of particles and fibers, reduce in the spray painting, sealing, welding, paint construction of defective products, so that the wiping process is more standardized, eliminate the replacement of operators, bring aboutthe uncertainty of product quality control, greatly reduce the cross pollution in the process of cleaning.
